2016年论文汇总

[1]   Dongsheng Lv Jiuhua Xu, Wenfeng Ding, Yucan Fu, Changyong Yang, Honghua Su. Tool wear in milling Ti40 burn-resistant titanium alloy using pneumatic mist jet impinging cooling. Journal of Materials Processing Technology, 2016, 229: 641-650. （SCI收录）

[2]   Zhengcai Zhao, Yucan Fu, Jiuhua Xu, Zhiwei Zhang. Behavior and quantitative characterization of CBN wheel wear in high-speed grinding of nickel-based superalloy. International Journal of Advanced Manufacturing Technology, 2016, 87: 3545-3555. （SCI收录）

[3]   Zhengcai Zhao, Jiuhua Xu, Yucan Fu. Study on coolant-induced hydrodynamic pressure in contact zone while deep grinding with CBN wheels. Machining Science and Technology, 2016 20(4): 547-566. （SCI收录）

[4]   Zhengcai Zhao, Yucan Fu, Jiuhua Xu, Zhiwei Zhang, Zhiwu Liu, Jian He. An investigation on high-efficiency profile grinding of directional solidified nickel-based superalloys DZ125 with electroplated CBN wheel. International Journal of Advanced Manufacturing Technology, 2016 83(1-4): 1-11. （SCI收录）

[5]   Jiajia Chen, Yucan Fu, Qingshan He, Houfa Shen, Chan Y.Ching, Dan Ewing. Environmentally friendly machining with a revolving heat pipe grinding wheel. Applied Thermal Engineering, 2016, 107: 719-727. （SCI收录）

[6]  Zheng Li ,Wenfeng Ding, Long Shen, Xinxin Xi, Yucan Fu. Comparative investigation on high-speed grinding of TiCp/Ti-6Al-4V particulate reinforced titanium matrix composites with single-layer electroplated and brazed CBN wheels. Chinese Journal of Aeronautics, 2016, 29(5): 1414-1424. （SCI收录）

[7]   Qing Miao, Wenfeng Ding, Yejun Zhu, Zhenzhen Chen, Yucan Fu. Brazing of CBN grains with AgCuTi/TiX composite filler-The effect of TiX particles on microstructure and strength of bonding layer, Materials and Design, 2016, 98: 243-253. （SCI收录）

[8]   Qing Miao, Wenfeng Ding, Yejun Zhu, Zhenzhen Chen, Jiuhua Xu, Changyong Yang. Joining interface and compressive strength of brazed cubic boron nitride grains with Ag-Cu-Ti TiX composite fillers, Ceramics International, 2016, 42: 13723-13737. （SCI收录）

[9]   Wenfeng Ding, Qing Miao, Yejun Zhu, Jiuhua Xu, Yucan Fu. Comparative investigations on wear behavior and self-sharpening phenomenon of polycrystalline cubic boron nitride and monocrystalline cubic boron nitride grains in high-speed grinding, Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 2016, 230(4): 710-721. （SCI收录）

[10] Honghua Su, Jianbo Dai, Wenfeng Ding, Kun Zhang, Wang Xu, Experimental research on performance of monolayer brazed diamond wheel through a new precise dressing method-plate wheel dressing, International Journal of Advanced Manufacturing Technology, 2016, 87: 3249-3259. （SCI收录）

[11] Biao Zhao, Wenfeng Ding, Jiuhua Xu, Honghua Su. Comparative study on cutting behavior of vitrified CBN wheel and electroplated CBN wheel in high speed grinding (TiC_p+TiB_w)/Ti-6Al-4V composites. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 2016, 230(3): 428-438. （SCI收录）

[12] Gaoqun Liu, Zhengcai Zhao, Yucan Fu, Zhiliang Yan. An investigation of forces and tool wear in milling of Ni3Al-base superalloy. Materials Science Forum. 2016 861, 32-37.

[13] Houfa Shen, Yucan Fu, Jiajia Chen. A new modified model for simulation of a two-phase closed thermosyphon. IHPC and 12th IHPS, 2016.

[14] Liang Zhang, Yucan Fu, Lu Yang, Xinle Zhu. Analysis of Dynamic Characteristics of an ultra-high-speed Grinding Spindle Unit. Xi`an: the 7th International Conference on High Speed Machining, 2016.

[15] Xinle Zhu, Yucan Fu, Lu Yang, Liang Zhang. Optimization Design of a CFRP Grinding Wheel Body for High Speed and Ultra-High Speed Grinding. Xi`an: the 7th International Conference on High Speed Machining, 2016.

[16] Chenlin Xu, Yan Chen, Haojun Yang, Yongsheng Zhang, Jiuhua Xu. Finite element analysis of the influence of drill geometry on cutting force in drilling Ti-6Al-4V, 7th ICHSM, 2016.

[17] 葛恩德, 傅玉灿, 苏宏华, 徐九华, 陈雪梅. TC21 钛合金板孔冷挤压残余应力与疲劳性能研究. 稀有金属材料与工程, 2016, 45(5): 1189-1195 （SCI收录）

[18] 吕东升, 徐九华, 丁文锋, 傅玉灿. 聚晶金刚石刀具铣削Ti40阻燃钛合金失效机理研究, 南京航空航天大学学报, 2016, 48(6): 870-878.

[19] 杨长勇, 高绍武, 徐九华, 傅玉灿, 杨能阁, 闫文, 周晓卫. 难加工材料精密孔高效珩磨技术研究进展. 航空制造技术, 2016, 09: 26-30.

[20] 董洪亮, 杨长勇, 高绍武, 傅玉灿, 周晓卫, 刘忠. 镍基高温合金孔孔珩磨余量对加工质量的影响, 金刚石与磨料磨具工程, 2016, 36(2): 10-14.

[21] 高俊杰, 傅玉灿, 陈佳佳, 顾志斌. 高频感应钎焊热管砂轮仿真与试验研究. 金刚石与磨料磨具工程, 2016, 36(6): 35-40.

[22] 胡浩, 苏宏华, 戴剑博. 碟轮修整对单层钎焊金刚石砂轮磨粒形貌影响研究. 第二十届中国超硬材料技术发展论坛论文集，2016.

[23] 丁晨, 丁文锋, 戴晨伟, 徐九华. 单层钎焊CBN砂轮表面形貌重构与磨粒切厚分布特征研究. 金刚石与磨料磨具工程, 2016, 36(4): 24-28.

[24] 申龙, 丁文锋, 李征, 肖红, 王训扬. 缓进深切磨削颗粒增强钛基复合材料磨削温度的研究. 金刚石与磨料磨具工程, 2016, 36(4): 44-48.

[25] 申龙, 丁文锋, 李征, 刘超杰, 王训扬. 缓进深切磨削颗粒增强钛基复合材料磨削力的研究. 金刚石与磨料磨具工程, 2016, 36(6): 41-46.

[26] 董洪亮, 杨长勇, 高绍武, 傅玉灿, 周晓卫, 刘忠. 镍基高温合金孔珩磨余量对加工质量的影响. 金刚石与磨料磨具工程, 2016, 2: 10-14.

[27] 赵泽宇, 丁文锋, 朱烨均, 黄鑫. 高频感应钎焊多晶立方氮化硼磨粒强度与钎焊界面微结构分析. 第二十届中国超硬材料技术发展论坛论文集, 2016.